Guide · Workplace Technology
Conference room AV design: displays, cameras and audio that work
Most failed meetings fail on audio, not video. A practical guide to sizing displays, framing cameras, placing microphones and standardising rooms across sites.
In short: size the display so the furthest seat is no more than six to eight screen-heights away, choose a camera that frames every seat, put microphones within a couple of metres of every speaker and treat echoing rooms before adding equipment. Give users one way to start a meeting, and standardise a few room designs across sites. Audio causes more failed meetings than video.
How big should the display be?
The widely used 4/6/8 rule relates screen height to the distance of the furthest viewer: no more than eight screen-heights for general viewing, six for detailed content such as spreadsheets, and four for close inspection of drawings. In a typical meeting room that means a 65- to 75-inch display for small rooms and dual displays or larger screens for long boardrooms. Two displays help hybrid meetings: one for people, one for content.
Cameras: frame everyone, at eye level
- Choose the camera's field of view to cover every seat, including the ones closest to the screen.
- Mount it at eye level, just above or below the display.
- In large rooms, use cameras that frame the active speaker automatically, or a second camera.
Audio: where most meetings fail
- Place microphones within a couple of metres of every seat; use ceiling or table arrays in larger rooms.
- Treat hard rooms: glass, bare walls and concrete ceilings create echo that no microphone can fix. Panels, carpet and curtains help.
- Separate speakers from microphones and use echo cancellation.
- Test with someone joining remotely, not only from inside the room.
Make starting a meeting simple
Wireless casting or a single touch controller removes the cable hunt. Calendar-integrated room systems let users join with one tap. Every extra step increases the chance someone calls the help desk.
Standardise across sites
Define three or four room types (huddle, medium, boardroom, training) with a fixed equipment list each. Users learn one way of working, installers work faster, and support teams stock one set of spares. Add a weekly room check so faults are found before an important meeting.
Beyond meeting rooms
Lecture halls need voice reinforcement and lecture capture; banquet halls need flexible projection and audio for different layouts. Nuclear Edge has installed lecture-hall video walls for tier-1 universities including IIT Delhi, meeting-room AV across offices for a quick-commerce platform, and conference and banquet AV for hotels. See collaboration and AV.
Frequently asked questions
What is the 4/6/8 rule for displays?
It relates screen height to viewing distance: the furthest viewer should be no more than eight screen-heights away for general viewing, six for detailed content and four for close inspection.
Why do video calls from meeting rooms sound bad?
Usually because microphones are too far from speakers or the room echoes. Moving microphones closer, using arrays and treating hard surfaces fixes most problems.
What equipment does a hybrid meeting room need?
A display (ideally two), a camera that frames every seat at eye level, microphones near every participant, speakers with echo cancellation, and a simple way to start the meeting or share content.