Guide · Energy & Power
HVDC vs HVAC: why India moves bulk power over direct current
India's grid uses alternating current, but its largest inter-regional power links increasingly use HVDC. What each technology does best and why it matters for renewables.
In short: high-voltage alternating current (HVAC) is the backbone of every grid because voltages are easy to change with transformers. High-voltage direct current (HVDC) is better for moving very large amounts of power over long distances, for linking grids that are not synchronised and for controlling exactly how much power flows. India uses ±800 kV HVDC links to carry power between regions, and HVDC will matter more as renewable generation far from cities grows.
How does HVDC differ from HVAC?
| HVAC | HVDC | |
|---|---|---|
| Changing voltage | Simple, with transformers | Needs converter stations at each end |
| Losses over long distances | Higher | Lower |
| Conductors and corridor width | More for the same power | Fewer, narrower corridor |
| Power flow control | Follows the network | Set precisely by operators |
| Linking asynchronous grids | Not possible directly | Possible |
| Terminal cost | Lower | Higher |
Because converter stations are expensive, HVDC pays off above a break-even distance, typically several hundred kilometres for overhead lines and much shorter for undersea or underground cables.
LCC and VSC converters
Line-commutated converters (LCC) use thyristors and suit very high power over long distances. Voltage-source converters (VSC) use transistors, take less space, can support weak grids and suit connecting renewable plants and offshore wind. Most of India's ultra-high-voltage links are LCC.
HVDC in India
India's ±800 kV links include the Champa–Kurukshetra link between the Western and Northern regions, Raigarh–Pugalur from Chhattisgarh to Tamil Nadu, and Biswanath Chariali–Agra from the North-East. They move power from where it is generated to where it is used, and let operators control inter-regional flows precisely.
Why HVDC matters for renewables
Solar and wind resources are concentrated in states such as Rajasthan, Gujarat and Ladakh, far from many demand centres. Long, high-capacity HVDC corridors, with controllable flows that help manage variable output, are part of how that energy will reach consumers. Transmission, not generation, is increasingly the constraint; see grid readiness for India's solar build-out.
Our work
Nuclear Edge completed works on the 800 kV WR–NR HVDC project at Kurukshetra and the 400 kV AIS substation at HVDC Champa for Power Grid Corporation, along with 765 kV substation works at Khetri and Bhadla-II. See HVDC and transmission and the Kurukshetra case study.
Frequently asked questions
Why is HVDC used instead of AC for long distances?
HVDC has lower losses over long distances, needs fewer conductors and narrower corridors for the same power, and allows precise control of power flow, which outweighs the cost of converter stations beyond a break-even distance.
What are India's 800 kV HVDC links?
They include Champa–Kurukshetra between the Western and Northern regions, Raigarh–Pugalur from Chhattisgarh to Tamil Nadu, and Biswanath Chariali–Agra from the North-East.
What is the difference between LCC and VSC HVDC?
LCC uses thyristor converters and suits very high power over long distances; VSC uses transistor converters, needs less space, supports weak grids and suits renewable and offshore connections.